Frese per unghie

Frese per unghie: per la cura professionale delle unghie e la manicure

Qui trova frese e punte per apparecchi da manicure – per manicure, pedicure, unghie in gel e acrilico. Le punte si adattano ai manipoli in commercio; gli apparecchi al momento non fanno parte del nostro assortimento.

Maggiori informazioni: materiali delle frese e utilizzo

Scelga tra un'ampia gamma di frese in ceramica, diamante o metallo duro – per limare, accorciare, levigare o rimuovere gel e acrilico. Che si tratti di rimuovere le pellicine, levigare le callosità o modellare l'unghia, qui trova l'accessorio adatto a ogni impiego.

  • Set di frese versatili – in metallo duro, ceramica o diamante, adatti a ogni lavorazione
  • Ideali per principianti e professionisti – durevoli e pensate per l'uso continuo
  • Rimozione efficace di gel, acrilico, shellac e altro
  • Limatura precisa e modellazione perfetta dell'unghia

Modelli adatti: Diamant-Kegelbit für Nagelfräser diamante, forma conica · Nagelfräser Bit aus Hartmetall – Extra Grob (XC) metallo duro, grana extra grossa · Karbid-Nagelfräser Bit Mittelkorn metallo duro, grana media · Ruck Fräser und Schleifer frese e levigatori Ruck · Nagelfräser Bit Hartmetall (M) metallo duro, grana M · Ruck Thermo-Schleifkappen – 10 Stück cappucci abrasivi, 10 pezzi

Se preferisce lavorare senza apparecchio, trova gli strumenti manuali in Lime per unghie e Strumenti di podologia.

Frequently Asked Questions about Nail Drill Bits

What are nail drill bits?

Nail drill bits are the interchangeable attachments (abrasive heads) for electric nail drills. Depending on material, shape, and grit, they are used for shortening, shaping, removing gel/acrylic, and for cuticle and callus care.

What bit materials are available – carbide or diamond?

Carbide bits remove material through cutting and are suitable for gel and acrylic (carbide bit). Diamond bits grind finely and are ideal for natural nails, cuticles, and sensitive areas (diamond cone bit).

What do the grits XC, C, M, F, and XF mean?

The letters stand for the grit: XC extra coarse, C coarse, M medium, F fine, XF extra fine. Coarse removes material quickly, fine refines the surface:

Which bit is suitable for removing gel and acrylic?

For quickly removing gel and acrylic, coarse carbide bits in a flame shape are suitable. Then switch to a finer grit for finishing.

Which bit is suitable for cuticle care?

For the cuticle, a fine diamond bit is suitable – it works gently and precisely on the sensitive nail fold.

What bit shapes are available (flame, cone)?

The flame shape is suitable for working on the nail fold and under the nail, while the cone shape (diamond cone bit) is used for smoothing larger areas. The shape determines how well you can reach certain areas.

Is a nail drill bit set worth it?

Yes – a diamond nail drill bit set bundles various shapes and grits and covers all important steps – ideal for getting started.

What shank size do the bits have?

Our bits have the common standard shank of 3/32 inch (2.35 mm) and therefore fit most commercially available electric nail drills.

Are the bits suitable for natural nails and artificial nails?

Yes – fine diamond bits are recommended for natural nails, while coarser carbide bits are better for gel and acrylic. Always work on natural nails at a low speed and with light pressure.

How do I clean and disinfect nail drill bits?

Remove dust after each use, then clean and disinfect; carbide and diamond bits can also be sterilized. This keeps them hygienic and sharp for longer.

Nail drill bit or file – which one for what?

The drill with bit works quickly and is ideal for artificial nails and calluses, while the classic nail file is gentler on natural nails when out and about. Many people combine both.

Where can I find all nail drill bits at a glance?

You'll find all bits bundled under Nail Drill Bits. Also suitable are nail files, callus shavers, and other nail instruments.